Kevlar®

The Kevlar® webbing is soft and as flexible as regular webbing, it also is chemical resistant to solvents, resistant to mold and mildew, and UL certified.

86100

This is a Kevlar® special construction harness constructed from 100% Kevlar®, provides protection against heat, arc flash, cuts, and abrasion. It’s lightweight, offers great mobility, with corrosion resistant hardware.

Features:

  • Webb-Kote coating
  • Back D-ring
  • Tongue & buckle leg straps
  • Zinc plated steel hardware
  • Lanyard keepers
  • Spring loaded torso adjusters
  • OSHA 1926-502, OSHA 1910.140, ANSI Z359.1-07, ANSI A10.32-2012

Sizes:

  • 86100 Small/Large
  • 86600 Large/XL
  • 86800 XL/3XL

865

Single leg style lanyard with shock absorber, ideal for fall arrest, fall restraint, and work positioning, in case a fall occurs the shock absorber deploys to reduce the forces on the wearer and the anchor point.

Features:

  • Constructed with Kevlar® webbing
  • 6’ length
  • Shock absorber
  • One man rated, 130-310 lbs.
  • 4 ft. max deployment
  • Average arrest force: 900 lbs.
  • Snap hook attachment to dorsal ring of harness
  • Snap hook on leg
  • Tie-back ring
  • Zinc plated steel hardware
  • OSHA 1926-502, OSHA 1910.140, ANSI Z359.12-12, ANSI Z359.13-13, ANSI A10.32-12, CSA Z259

860

Y-leg style lanyard with shock absorber that gives mobility and safety, it provides 100% tie-off while transitioning between positions or locations, and in case a fall occurs the shock absorber deploys to reduce the forces on the wearer and the anchor point.

Features:

  • Constructed with Kevlar® webbing
  • 6’ length
  • Shock absorber
  • One man rated, 130-310 lbs.
  • 4 ft. max deployment
  • Average arrest force: 900 lbs.
  • Snap hook attachment to dorsal ring of harness
  • Snap hooks on each leg
  • Tie-back rings
  • Zinc plated steel hardware
  • OSHA 1926-502, OSHA 1910.140, ANSI Z359.12-12, ANSI Z359.13-13, ANSI A10.32-12, CSA Z259

861

Y-leg style lanyard with shock absorber that gives mobility and safety, it provides 100% tie-off while transitioning between positions or locations, and in case a fall occurs the shock absorber deploys to reduce the forces on the wearer and the anchor point.

Features:

  • Constructed with Kevlar® webbing
  • 6’ length
  • Shock absorber
  • One man rated, 130-310 lbs.
  • 4 ft. max deployment
  • Average arrest force: 900 lbs.
  • Snap hook attachment to dorsal ring of harness
  • Rebar hooks on each leg
  • Tie-back rings
  • Zinc plated steel hardware
  • OSHA 1926-502, OSHA 1910.140, ANSI Z359.12-12, ANSI Z359.13-13, ANSI A10.32-12, CSA Z259

(Reserved for Kevlar® SRL)

Related Posts